Студопедия Главная Случайная страница Обратная связь

Разделы: Автомобили Астрономия Биология География Дом и сад Другие языки Другое Информатика История Культура Литература Логика Математика Медицина Металлургия Механика Образование Охрана труда Педагогика Политика Право Психология Религия Риторика Социология Спорт Строительство Технология Туризм Физика Философия Финансы Химия Черчение Экология Экономика Электроника

Expansion Slots and Cards




An expansion slotis a socket on the motherboard where expansion cards can be plugged into. An expansion card, also referred to as "expansion boards," "controller cards," or "adapters," is a small circuit board that enhances the functionality of a computer by enabling a computer to control storage devices, input devices, or output devices. Examples of expansion cards include graphics cards (or video cards) and sound cards.

The image below shows an expansion card being inserted into an expansion slot.

Figure 2 Inserting an expansion card into an expansion slot

The two most common types of expansion slots are Peripheral Component Interconnect (PCI) and Accelerated Graphics Port (AGP). A PCI slot can hold a variety of expansion cards such as a sound card or an Ethernet card (discussed later in this section).An AGP slot is primarily used for graphics cards (see discussion on graphics cards below).

In laptops, a PCMCIA (personal computer memory card international association) slot, which is relatively smaller than a PCI slot, fulfills the role of a PCI slot. Typically, a notebook computer is equipped with PCMCIA slots for expansion cards also called CardBus cards or PC cards.

Some commonly used expansion cards are:

Graphics card- transforms images into analog data that we perceive as light when displayed on the computer monitor. A graphics card is also known as the video card. A graphical image on the monitor is composed of many colored dots, or pixels. In order to display an image on the screen, image data is represented as colored pixels. Each color is indicated by an RGB value, a mix of red, green, and blue colors.

A graphics card has its own memory and processor that handles computations necessary to convert image data to be displayed into pixels on the monitor. More specifically, to display a 3-D image, the graphics card first rasterizes the image, or convert the 3-D image into a 2-D representation of the image using geometric conversion algorithms. Each pixel in the 2-D representation has an RGB (red, green, and blue) value to indicate its color. The graphics card then converts the RGB value of each pixel into analog data to enable the monitor to project the colored pixels that we recognize as the 3-D image.

Sound card- allows a computer to play sounds such as music from CDs, sound files, games, or DVDs. It can also record sounds from a microphone, cassette player, or CD player. The sound card is usually plugged into the Peripheral Component Interconnect (PCI) slot, or its functionality may be integrated as part of the chipset on the motherboard.

In order for the computer to record sounds, which are analog waveform signals, the analog signals are converted into digital signals. For instance, to record a sound input through a microphone onto a .wav file and save it on hard disk, sounds in analog waveform are converted into digital data. The data is then sent through the bus to the processor, which routes the data to the hard-disk controller, and the hard-disk controller sends the data to the hard-disk drive to be saved there as a .wav file.

Modem- one type of modem is the dial-up modem, which enables a computer to exchange information with a remote computer through ordinary telephone lines. Generally, data in binary form is sent out through a modem, which converts the binary data into analog data before transmitting it through a phone line or a cable line. A modem at the receiving end converts the analog data back into digital data to be used by the computer at the receiving end. A dial-up modem can transfer data at a rate up to 56 kilobits per second (Kbps) from the Internet to the computer.

Ethernet card- serves as the interface to a Local Area Network (LAN), a common network technology allowing users access to network resources such as the Internet, email, shared printers, etc. at a rate of 10 Mbps (more about LAN will be discussed in Unit 6). Newer versions of Ethernet called "Fast Ethernet" and "Gigabit Ethernet" support data rates of 100 Mbps and 1 Gbps (1000 Mbps).

Below are images of Ethernet cards. The one on the left is an Ethernet card used to plug into the PCMCIA slot of a laptop computer. The one on the right is an Ethernet card for a PCI slot in a desktop.

Figure 3 Ethernet cards for PCMCIA slot and PCI slot, respectively

Ports

An expansion card usually includes ports, which are connectors that enable signals to be passed in and out of a computer or peripheral device to exploit the functionality of the expansion card. For example, a video card provides a monitor port. Ports can also be built into the motherboard of a desktop or a notebook computer. Similar ports can be used to plug in peripheral devices such as the mouse and the keyboard.

The image below shows the ports on the back of a computer.

Figure 4 Ports on the back of a computer

A PS/2 portis also known as a serial port. A serial port transfers data one bit at a time. It uses a 6-pin, mini-DIN configuration, which looks like a small, round port. The first appearance of this port was on the IBM PS/2 system, and since then it has become the de facto standard for keyboard and mouse connections. However, the PS/2 ports are gradually being replaced by USB ports.

Another type of serial port is the DB-9 port. It is also becoming obsolete. PDA devices used to connect to DB-9 ports before the advent of USB ports. Other devices that can be connected to a DB-9 port are the external modem and the barcode scanner, in general, older electronic devices.

In contrast, a parallel port transfers one byte at a time. The port connection on the system is DB-25F, requiring a 25-pin male connector (DB-25M) on the cable. A DB-25F port can be used for printers or external drives. A parallel port is typically used to connect a computer to a printer, which uses a different kind of connector than does the computer.







Дата добавления: 2015-09-04; просмотров: 1621. Нарушение авторских прав

codlug.info - Студопедия - 2014-2018 год . (0.007 сек.) русская версия | украинская версия